Stainless Steel Wavy Washers For Electrical Connector
Description:
A reliable connection between the clip and the connecting cap of the electrical connector. The wave spring keeps a locking force between the clip pin and the chute of the electrical connector during the compression process, so that the two are closely connected without sliding out.
Specification:
| Part Number | LB-0035 | LB-0039 | LB-0043 | LB-0047 | LB-0051 | LB-0063 | LB-0075 | LB-0087 | LB-0095 | LB-0102 |
| Bearing O.D.(mm) | 9 | 10 | 11 | 12 | 13 | 16 | 19 | 22 | 24 | 26 |
| Clears Shaft Diameter(mm) | 6.86 | 7.49 | 8.46 | 9.17 | 9.53 | 11.28 | 14.28 | 16.46 | 18.46 | 18.22 |
| Load (N) | 25.8 | 27.6 | 29.4 | 33.4 | 37.8 | 44.5 | 53.4 | 62.3 | 66.7 | 71.2 |
| Work Height (mm) |
1 | 1 | 1 | 1 | 1 | 1.57 | 1.57 | 1.57 | 1.57 | 1.98 |
| Free Height (mm) |
1.5 | 1.57 | 1.83 | 1.57 | 1.57 | 2.29 | 3.05 | 2.79 | 3.56 | 2.54 |
| Number of Waves |
3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 |
| Thickness (mm) |
0.2 | 0.2 | 0.2 | 0.25 | 0.25 | 0.25 | 0.25 | 0.3 | 0.3 | 0.41 |
| Radial Wall(mm) | 0.81 | 1.02 | 1.02 | 1.17 | 1.47 | 1.98 | 1.98 | 2.39 | 2.39 | 3.38 |
| Spring Rate(N/mm) | 52 | 48 | 35 | 59 | 66 | 65 | 35 | 48 | 35 | 111 |
Processing Steps:
Design →Drawing→ Flat the wire → CNC Machining → Heat treatment → Surface → Finishing → Quality Inspection → Packing
Finish:
Oil Dip,Passivation,blacking, zinc/nickel/chrome/silver/gold plating, powder coated etc
Wave spring measurements:
English